Pre-treatment

Catalase-based peroxide killer at the lower activity grade, for baths that carry only a light peroxide residue.

Anti-peroxide catalase that breaks peroxide down in the bleach bath and cuts the rinses needed before dyeing.

Wide-window catalase that removes peroxide with one product where bleach bath temperature and alkalinity vary.

Catalase enzyme that splits the hydrogen peroxide left after bleaching into water and oxygen, protecting reactive dyeing.

Catalase formulation raw material supplied in bulk to chemical producers who prepare their own peroxide killers.

Concentrated acid cellulase that delivers the same anti-pilling effect from less product and cuts storage and freight load.

Acid cellulase for cotton knits and wovens that cuts protruding fibre ends, holds pilling back and leaves a bio-polished surface.

Acid cellulase that controls fuzz in bio-polishing and leaves cellulosic fabric with a smoother face and a cleaner colour yield.

High-activity acid cellulase for anti-pilling and bio-polishing recipes that have to clean the surface within a short cycle.

Acid cellulase raw material supplied to chemical producers who formulate their own anti-pilling and bio-polishing products.

Anionic wetting agent that stays soluble in caustic bleaching and alkaline desizing liquors, with no cloud point.

Fast-wetting anionic surfactant chosen for continuous pre-treatment ranges where contact time is short.

Anionic wetting agent with high alkali stability, staying soluble where pre-treatment recipes raise caustic levels.

Combined wetting agent gathering wetting, emulsifying, dispersing and alkali tolerance into one formulation.

Low-foam deaerating agent that evens out pick-up on pad ranges and reduces shade variation across the width.

Deaerating surfactant that clears the air trapped in the pores of dense fabric and prevents light specks in dyeing.

Mercerising wetting agent that stays soluble in concentrated caustic and gets the caustic into the fibre evenly.

Nonionic wetting agent: an uncharged surfactant that will not precipitate in hard water and shares a bath with cationics.

Nonionic wetting agent whose longer ethoxylate chain carries washing power alongside its wetting performance.

Nonionic wetting and washing agent covering wetting and the emulsification of oily soil from a single item.

Concentrated nonionic wetting and washing agent giving the same effect at low dosage, with less storage and packaging.

Wetting agent blending nonionic and anionic structures, working on the padder and in exhaust, neutral or alkaline.

Nonionic-anionic wetting agent that lets one pre-treatment recipe hold as bath conditions move around.

Wetting agent of mixed ionic character, formulated for mills that want to simplify the pre-treatment recipe.

Speciality nonionic-anionic wetting agent tuned for the difficult wetting conditions standard blends do not cover.

Sodium acrylate based sequestering agent that stops precipitation by disrupting crystal growth, free of phosphorus.

Modified acrylate sequestering agent with its dispersing side reinforced, for mills whose water hardness varies.

Acrylate and phosphonate blend sequestering agent covering hardness and heavy metals such as iron from one item.

Modified acrylate-phosphonate sequestering agent giving a steady result where water quality shifts lot to lot.

Concentrated polymeric sequestering agent giving hardness control and dispersion at low dosage, with less storage.

Heptonate based sequestering agent that holds iron as a soluble complex at high caustic concentration.

Acrylate and heptonate sequestering agent and stabiliser that holds peroxide steady without using silicate.

Concentrated sequestering blend that brings hardness, heavy metals and peroxide stabilising onto one dosing line.

General-purpose textile washing agent that takes spin finish and handling soil into the bath in pre-treatment.

Foaming washing agent that emulsifies soil off greige cloth where foam itself works as a carrier in the machine.

Washing agent for natural and synthetic blends, emulsifying residues of different chemistry in one bath.

Washing agent for blends, with higher detergency on lots that carry a heavy load of synthetic spin finish.

Oil-based anti-creasing agent whose ester oil phase gives more lubricity and a thicker film than a polymer does.

Polymeric anti-creasing agent whose film rinses out easily, protecting the goods without touching the next finish.

Polymeric anti-creasing agent that leaves a lubricating film on the fibre and keeps crease marks out of rope-form goods.

Concentrated polymeric anti-creasing agent giving protection at low dosage on heavy, crease-prone lots.

Oil-based antifoam carrying mineral or vegetable oil instead of silicone, so there is no silicone spotting risk.

Silicone antifoam in which silicone oil and hydrophobic silica tear the bubble wall, giving a fast knock-down.

Concentrated silicone antifoam suited to low-dosage use and interval feeding on long processes.